New Expert Moldbase Extension 12.0 Tutorial available

28 Aug. 2019 | Tips & Tricks

Extension 12.0 Tutorial available We just finished the new Tutorial. The PDF can be downloaded with here. The tutorial contains a step by step introduction to create a complete mold base design.

Read more
27 Aug. 2019 | Tips & Tricks

One of the main benefits of using Expert Moldbase Extension during the moldbase designed is the automatic cut-out creation for standard components. These functionality is mainly based on Creo User-Defined-Features (UDFs) The two main advantages are: Saving design time, by avoiding the manual creation of the cut-outs. Avoid design error, by providing standardizes cut-out logic. […]

Read more
08 Aug. 2019 | Tips & Tricks

With the described method it is possible to visualize the cut angles of profiles in the BOM. This makes drawings of regular beams with just angle cuts and no extra features obsolete. To get started download the zip file and follow the instructions of the readme.txt file.

Read more
17 Jul. 2019 | Tips & Tricks

In this a bit longer blog post we will demonstrate which steps are required to: configure Expert Moldbase Extension for Windchill. to automatically create all instances of one standard component and check-in these models to Windchill. to assemble standard parts from Windchill in mold base designs As an example the screw type E1200 from the […]

Read more
15 Jul. 2019 | Tips & Tricks

In addition to existing general output functionality, SMARTElectrode 12.0.0.0 introduces a new specific Post-Processor UI with newly developed interfaces to EDM. This new feature is available at extra cost and needs a demo license or an extended commercial license for activation. All current user-defined formats are still working with Output UI – the more sophisticated interfaces […]

Read more
15 Jul. 2019 | Tips & Tricks

There is a new user interface for definition of cutouts available in SMARTElectrode 12.0.0.0. Users can now adjust position and dimensions before  solid and cutout are created. UI can be opened again to change values using context menu in modeltree.     NoteThis functionality replaces user-defined cutout.

Read more
15 Jul. 2019 | Tips & Tricks

Electrode assembly definition can be loaded and changed in SMARTElectrode 12.0.0.0. This new functionality may be helpful, especially when working with reference parts. Also the start value for electrode counter can be adjusted. Changes to prefix/postfix or renaming of whole assembly may be added later – feedback welcome!

Read more
15 Jul. 2019 | Tips & Tricks

SMARTElectrode 12.0.0.0 offers input for effective burn-area on 2nd tab “Details” in Base UI for complete definition of technology parameters. Also workpiece material was added to UI to simplify the workflow. SMARTElectrode performs a fast calculation for effective burn-area if no burn-face value available. An exact calculation can be started using the submenu. Also the […]

Read more
15 Jul. 2019 | Tips & Tricks

UI for data output offers some new improvements in SMARTElectrode 12.0.0.0: Name of Operation Exports will be named like selected operation by default. All operations of electrode assembly can be exported in a row without changing the name. Output by Simplified Representation In addition to export by operation or selected electrodes, users can now also […]

Read more
07 Jun. 2019 | Tips & Tricks

With this new command it is now possible to trim interfering ejector pin heades against each other. This feature is available with the version EMX 10 M032, EMX 11.0.2.2 and EMX 12.0.0.1 A video can be found on our Youtube channel

Read more
Back << 1 | 2 | 3 | 4 | 5 >> Forward