Solutions for efficient product design

Category: Updates

Updates

New Version of Expert Moldbase Extension released

New Version of Expert Moldbase Extension released

For our mold base design module Expert Moldbase Extension (EMX) new updates are now available: EMX 14.0.1.10 EMX 13.0.3.10 In this release we worked on minor..

New Version of IFX available

New Version of IFX available

 IFX 7.0.8.0 There are some bugfixes in the new IFX Version: Problem with redefinition of countersunk screws fixed. The problem occured in combination with Auto-UDF. The..

New Version of AFX released

New Version of AFX released

We have released the new version 9.0.0.1 for  Advanced Framework Extension (AFX). Version 9.0.0.1 has the following enhancements : Creo 9.0 support New AutoUDF user interfaces..

New Version of AFX released

New Version of AFX released

We have released the new version 7.0.9.1 for Advanced Framework Extension (AFX). The following points should be noted for version 7.0.9.1: Updated toolkit libraries to Creo..

New Version of AFX released

New Version of AFX released

We have released the new version 8.0.4.0 for Advanced Framework Extension (AFX). The following points should be noted for version 8.0.4.0. Updated toolkit libraries to Creo..

New Releases for Expert Moldbase Extension are available

New Releases for Expert Moldbase Extension are available

For our mold base design module Expert Moldbase Extension (EMX) new updates are now available: EMX 14.0.1.7 EMX 13.0.3.7 In these releases new components are implemented:..

New Version of IFX available

New Version of IFX available

IFX 8.0.4.0 Improvements Problem with redefinition of countersunk screws fixed Fixed Creo crash when Redefine a screw fastener This is only a quick overview of the..

New Releases for Expert Moldbase Extension are available

New Releases for Expert Moldbase Extension are available

For our mold base design module Expert Moldbase Extension (EMX) new updates are now available: EMX 14.0.1.4 EMX 13.0.3.4 In this releases we integrated the Weblink..

New Releases for Expert Moldbase Extension are available

New Releases for Expert Moldbase Extension are available

For our mold base design module Expert Moldbase Extension (EMX) new updates are now available: EMX 14.0.1.1 EMX 13.0.3.1 In both release we improved the assembly..

This was the B&W Webinarweek 2021!

This was the B&W Webinarweek 2021!

In October our annual B&W webinar week took place. We hopefully provided interesting insights as well as tips and tricks for our software, with its 13..

New versions of SMARTElectrode released

New versions of SMARTElectrode released

New updates for SMARTElectrode are available  now. SMARTElectrode 14.0.1.0 The version can be used from Creo Parametric 8.0.1.0. What’s new in 14.0.1.0? Open complete changelog  here...

New Releases of SMARTXHatch

New Releases of SMARTXHatch

New versions of SMARTXHatch are available. Both versions have the ICU fix and therefore run with the new Toolkit libraries. SMARTXHatch 11.0.1.0 For version 11.0.1.0 to..

Successfully provide company-wide configuration in Expert Moldbase Extension

Successfully provide company-wide configuration in Expert Moldbase Extension

In the Expert Moldbase Extension many opportunities exist to customize the software behavior based on the company’s requirements. Anyhow, it is necessary to understand how to manage and..

The new functionalities in SMARTUpdate 11.0.0.0

The new functionalities in SMARTUpdate 11.0.0.0

A new version SMARTUpdate 11.0.0.0 is now available. We implemented the following new features: Introduce Inseparable Assemblies check to embed and extract components Components can be found by..

New Versions of SMARTOptics available

New Versions of SMARTOptics available

New versions are available for SMARTOptics 7.0.3.1 for Creo Parametric 4.0 to 6.0 7.1.0.0 for Creo Parametric 7.0.0.0 7.1.1.0 for Creo Parametric 7.0.4.0 8.0.0.0 for Creo..

New Versions of SMARTHolechart available

New Versions of SMARTHolechart available

New versions are available for SMARTHolechart. 13.0.1.0 for Creo Parametric 7.0.4.0 14.0.0.0 for Creo Parametric 8.0.0.0 Support for embedded components.

New Versions of IFX available

New Versions of IFX available

IFX 7.0.4.0 Enhancements and Improvements Unicode characters can now be used in the param_relation.txt file. Thread surfaces are no longer allowed as a position reference. Fix..

The relations in our Creo parts are a big mess

The relations in our Creo parts are a big mess

Do you struggle with the relations in your Creo parts? Have a look at this story to find out how you can solve it. After-Work family..

Potential issue in running B&W software in Creo 7.0.4.0 and 8.0.1.0

Potential issue in running B&W software in Creo 7.0.4.0 and 8.0.1.0

Applies To Creo Parametric versions from 7.0.4.0 and 8.0.1.0 onwards. AFX, IFX, SMART products and many other customer-specific applications. Description A new checkbox Legacy Toolkit Application Runtime is..

New Releases for Expert Moldbase Extension are available

New Releases for Expert Moldbase Extension are available

For our mold base design module Expert Moldbase Extension (EMX) new updates are now available: EMX 13.0.2.1 EMX 12.0.2.9 EMX 10 M057 In all modules we improved the..

New Release of SMARTXHatch 10.0.2.0

New Release of SMARTXHatch 10.0.2.0

A new version SMARTXHatch 10.0.2.0 is available now. We implemented the following new features: Application should no longer become unresponsive when a custom line style is used. File..

New Release of AFX 7.0.3.0

New Release of AFX 7.0.3.0

A new version Advanced Framework Extension (AFX) 7.0.3.0 is available now. We implemented the following new features: Children of subassemblies are given correct names when replacing the model..

What’s new in SMARTColor Version 4.3.3.0 – New Settings And Icons

What’s new in SMARTColor Version 4.3.3.0 – New Settings And Icons

The new SMARTColor version 4.3.3.0 has been extended with several new features, which have been split to the respective blog posts. In this post we will..

What’s New in SMARTColor 4.3.3.0 – The Multi Language Support

What’s New in SMARTColor 4.3.3.0 – The Multi Language Support

The new SMARTColor version 4.3.3.0 has been extended with several new features, which have been split to the respective blog posts. In this post we will..

What’s New in SMARTColor 4.3.3.0 – Enhancements to the ‘Model Overview’ dialog

What’s New in SMARTColor 4.3.3.0 – Enhancements to the ‘Model Overview’ dialog

The new SMARTColor version 4.3.3.0 has been extended with several new features, which have been split to the respective blog posts. This post is all about..

New Version of Creo Intelligent Fastener Extension 7.0.3.0 released

New Version of Creo Intelligent Fastener Extension 7.0.3.0 released

Select hole chart for IFX holes Advantages Use different hole charts for different fastener types. Show different hole notes. Control the counterbore diameter with CBOREDIAM and..

New versions of Expert Moldbase Extension released

New versions of Expert Moldbase Extension released

EMX releases new updates in different versions among others new and updated DME EUROPE and MEUSBURGER components are available EMX 13.0.1.0 EMX 12.0.2.8 EMX 10 M056..

Collaboration with DME Europe

Collaboration with DME Europe

  Some customers asked us about the possibility of DME components in EMX – the tooling application for Creo Parametric. For this development, we have selected DME..

PTC/USER Webinar – Creo Color Coding

PTC/USER Webinar – Creo Color Coding

Jan Stothfang will give a presentation on “Creo Color Coding – A Technique to transfer 3D Model Information for Downstream Processes” as part of the PTC/User..

New functions with SMARTUpdate 10.0.0.0

New functions with SMARTUpdate 10.0.0.0

A new version SMARTUpdate 10.0.0.0 is available now. We implemented the following new features: There is a new “Body Check” to adjust body properties. Customize materials of each..

Note about issues with digitally signed B&W applications

Note about issues with digitally signed B&W applications

During the past months, we received a small number of reports describing issues with loading IFX or AFX during Creo startup. Analyzing the problem, we found..

AFX 7.0.2.0 released

AFX 7.0.2.0 released

The next update for the Advanced Framework Extension 7.0.2.0 is now available. See here here for a list of all changes.

Intelligent Fastener Extension 7.0.2.0 released

Intelligent Fastener Extension 7.0.2.0 released

A new version of Intelligent Fastener Extension 7.0.2.0 is available now. The complete list of changes can be found in the changelog. Details about the new features..

New SMARTColor Version 6.3.1.0 available!

New SMARTColor Version 6.3.1.0 available!

A new version SMARTColor 6.3.1.0 is available now! You can define a single template symbol usable for all color definitions now. You can download the complete What’s New..

That was our B&W Webinar Week 2020!

That was our B&W Webinar Week 2020!

B&W Webinar Week 2020 was a fantastic event with 14 sessions from October 27th to 29th in two different languages. There were again many exciting topics, great..

SMARTMenu 11.0.0.0 released

SMARTMenu 11.0.0.0 released

The new SMARTMenu 11.0.0.0 is now available for downloading. It is compatible with Creo 6.0. An overview of technical changes can be found here.

SMARTMenu 10.0.1.0 released

SMARTMenu 10.0.1.0 released

The new SMARTMenu 10.0.1.0 is now available for downloading. An overview of technical changes can be found here.

SMARTMenu 12.0.0.0 released

SMARTMenu 12.0.0.0 released

The new SMARTMenu 12.0.0.0 is now available for downloading. This version is compatible with Creo 7.0. An overview of technical changes can be found here.

Intelligent Fastener Extension 4.0 M140 released

Intelligent Fastener Extension 4.0 M140 released

Intelligent Fastener Extension 4.0 M140 is now available. The complete list of changes can be found here. An overview of compatibility can be found here.

SMARTElectrode 13.0.0.0 released

SMARTElectrode 13.0.0.0 released

SMARTElectrode 13.0.0.0 for Creo Parametric 7.0 is now available for download. This release supports the new features for multi-body design introduced in Creo Parametric 7.0. Detailed information..

SMARTElectrode 12.0.4.0 released

SMARTElectrode 12.0.4.0 released

SMARTElectrode 12.0.4.0 for Creo Parameric is now available! This release supports Creo Parametric 4.0, 5.0 and 6.0 and automates the design of sinking electrodes. Detailed information about..

AFX 7.0.1.0 released

AFX 7.0.1.0 released

The next update for the Advanced Framework Extension 7.0.1.0 is now available. See here here for a list of all changes.

AFX 6.0.5.0 released

AFX 6.0.5.0 released

The next update for the Advanced Framework Extension 6.0.5.0 is now available. See here here for a list of all changes.

Expert Moldbase Extension 13.0.0.3 released

Expert Moldbase Extension 13.0.0.3 released

A new version of Expert Moldbase Extension 13.0.0.3 is now available. To see the full what’s new document follow this link here(PDF, 1.2 MB). The complete change..

Expert Moldbase Extension 12.0.2.6 released

Expert Moldbase Extension 12.0.2.6 released

A new version of Expert Moldbase Extension 12.0.2.6 is now available. To see the full what’s new document follow this link here(PDF, 1.6 MB). The complete change..

Expert Moldbase Extension 10.0 M054 released

Expert Moldbase Extension 10.0 M054 released

A new version of Expert Moldbase Extension 10.0 M054 is now available. To see the full what’s new document follow this link here(PDF). The complete change log..

SMART3DExport 7.0 released

SMART3DExport 7.0 released

A new version of the “SMART3DExport” tool is now available. The complete list of changes can be seen here.

Intelligent Fastener Extension 6.0.5.0 released

Intelligent Fastener Extension 6.0.5.0 released

A new version of Intelligent Fastener Extension 6.0.5.0 is available now. The complete changelog can be found here. An overview of compatibility can be viewed here.

Expert Moldbase Extension 13.0.0.2 released

Expert Moldbase Extension 13.0.0.2 released

A new version of Expert Moldbase Extension 13.0.0.2 is now available. To see the full what’s new document follow this link here(PDF, 1.2 MB). The complete change..

Expert Moldbase Extension 12.0.2.5 released

Expert Moldbase Extension 12.0.2.5 released

A new version of Expert Moldbase Extension 12.0.2.5 is now available. To see the full what’s new document follow this link here(PDF, 1.5 MB). The complete change..

Expert Moldbase Extension 10.0 M053 released

Expert Moldbase Extension 10.0 M053 released

A new version of Expert Moldbase Extension 10.0 M053 is now available. To see the full what’s new document follow this link here(PDF). The complete change log can be..

SMARTElectrode 12.0.3.1 released

SMARTElectrode 12.0.3.1 released

A new release of SMARTElectrode 12.0.3.1 to support the design of sinking electrodes in Creo Parametric is now available. This update includes minor bugfixes and improvements for data..

Intelligent Fastener Extension 7.0.1.0 released

Intelligent Fastener Extension 7.0.1.0 released

A new version of Intelligent Fastener Extension 7.0.1.0 is available now. The complete changelog can be found here. An overview of compatibility can be viewed here.

Discover our new product websites!

Discover our new product websites!

We are proud to present our new product websites combining all relevant information at a glance. Find out about software benefits, features and technical details such..

SMARTElectrode 12.0.3.0 released

SMARTElectrode 12.0.3.0 released

A new release of SMARTElectrode 12.0.3.0 to support the design of sinking electrodes in Creo Parametric is now available. The most important changes at a glance: SMARTElectrode is..

SMARTHolechart 13.0.0.0 released

SMARTHolechart 13.0.0.0 released

A new update of SMARTHolechart version 13.0.0.0 is available in the download area. All technical changes can be found in the changelog.

SMARTHolechart 12.0.4.0 released

SMARTHolechart 12.0.4.0 released

A new update of SMARTHolechart version 12.0.4.0 is available in the download area. All technical changes can be found in the changelog.

SMARTXHatch 11.0.0.0 released

SMARTXHatch 11.0.0.0 released

The new SMARTXHatch 11.0.0.0 is now available for downloading. This version is compatible with Creo 7.0. An overview of technical changes can be found here.

AFX 6.0.4.0 released

AFX 6.0.4.0 released

The next update for the Advanced Framework Extension 6.0.4.0 is now available. See here here for a list of all changes.

Intelligent Fastener Extension 6.0.4.2 released

Intelligent Fastener Extension 6.0.4.2 released

A new version of Intelligent Fastener Extension 6.0.4.2 is available now. The complete changelog can be found here. An overview of compatibility can be viewed here.

New Version of SMARTColor available!

New Version of SMARTColor available!

There are new version of SMARTColor available, now. You can download it here fitting to your Creo® version. We will give you a short overview about the new..

SMARTXHatch 10.0.1.0 released

SMARTXHatch 10.0.1.0 released

The new SMARTXHatch 10.0.1.0 is now available for downloading. An overview of technical changes can be found here.

AFX 7.0.0.0 released

AFX 7.0.0.0 released

The newest update of AFX version 7.0.0.0 is now accessible in the download portal. This version supports Creo Parameteric 7.0.0.0. Updates: Overhauled ribbon interface Support of..

Intelligent Fastener Extension 7.0

Intelligent Fastener Extension 7.0

A new version of Intelligent Fastener Extension 7.0.0.0 is available now. It supports Creo 7.0. To see the full what’s new document follow this link here(PDF)(PDF, 320.2..

Expert Moldbase Extension 12.0.2.3 released

Expert Moldbase Extension 12.0.2.3 released

A new version of Expert Moldbase Extension 12.0.2.3 is now available. To see the full what’s new document follow this link here(PDF, 1.4 MB). The complete change..

Expert Moldbase Extension 11.0.4.2 released

Expert Moldbase Extension 11.0.4.2 released

A new version of Expert Moldbase Extension 11.0.4.2 is now available. To see the full what’s new document follow this link here(PDF, 1.5 MB). The complete change..

Expert Moldbase Extension 10.0 M052 released

Expert Moldbase Extension 10.0 M052 released

A new version of Expert Moldbase Extension 10.0 M052 is now available. To see the full what’s new document follow this link here(PDF). The complete change log..

Expert Moldbase Extension 13.0.0.0 released

Expert Moldbase Extension 13.0.0.0 released

A new version of Expert Moldbase Extension 13.0.0.0 is now available. This Version is compatible with Creo Parametric 7.0.0.0 and supports cut out creation in multi..

Expert Moldbase Extension 13.0.0.0 released

Expert Moldbase Extension 13.0.0.0 released

A new version of Expert Moldbase Extension 13.0.0.0 is now available. This Version is compatible with Creo Parametric 7.0.0.0 and supports cut out creation in multi..

B&W Software in times of Corona-virus

B&W Software in times of Corona-virus

Dear customers, dear partners, dear interested parties,   the B&W Software team will be there for you even in times of the corona virus.   The..

SMARTElectrode 12.0.2.0 released

SMARTElectrode 12.0.2.0 released

A new release of SMARTElectrode 12.0.2.0 to support the design of sinking electrodes in Creo Parametric is now available. The most important changes at a glance: New user..

AFX 6.0.3.3 released

AFX 6.0.3.3 released

The next update for the Advanced Framework Extension 6.0.3.3 is now available. See here here for a list of all changes.

Expert Moldbase Extension 12.0.2.1 released

Expert Moldbase Extension 12.0.2.1 released

A new version of Expert Moldbase Extension 12.0.2.1 is now available. To see the full what’s new document follow this link here(PDF, 1.1 MB). The complete change log can..

Expert Moldbase Extension 11.0.4.1 released

Expert Moldbase Extension 11.0.4.1 released

A new version of Expert Moldbase Extension 11.0.4.1 is now available. To see the full what’s new document follow this link here(PDF, 1.2 MB). The complete change..

Expert Moldbase Extension 10.0 M051 released

Expert Moldbase Extension 10.0 M051 released

A new version of Expert Moldbase Extension 10.0 M051 is now available. To see the full what’s new document follow this link here(PDF). The complete change log..

Merry Christmas!

Merry Christmas!

The year 2019 is almost over – the B&W Software team says thank you! Enjoy the holidays with sweets and candlelight and look forward to a..

AFX 6.0.3.2 released

AFX 6.0.3.2 released

The next update for the Advanced Framework Extension 6.0.3.2 is now available. See here here for a list of all changes.

AFX 6.0.3.1 released

AFX 6.0.3.1 released

The next update for the Advanced Framework Extension 6.0.3.1 is now available. See here here for a list of all changes.

SMARTElectrode 12.0.1.3 released

SMARTElectrode 12.0.1.3 released

A new version of SMARTElectrode 12.0.1.3 to support the design of sinking electrodes in Creo Parametric is now available. The most important changes at a glance: Automatic update..

SMARTXHatch 10.0.0.0 released

SMARTXHatch 10.0.0.0 released

The new SMARTXHatch 10.0 is now available for downloading. News Compatible with Creo 6.0 Concatenate rules with NOT/AND/OR Possibility to distribute hatchings to multiple views. All..

Expert Moldbase Extension 12.0.0.2 released

Expert Moldbase Extension 12.0.0.2 released

A new version of Expert Moldbase Extension 12.0.0.2 is now available. With this release EMX is now ready to be used with SMARTColor! To see the full..

Expert Moldbase Extension 10.0 M033 released

Expert Moldbase Extension 10.0 M033 released

A new version of Expert Moldbase Extension 10.0 M033 is now available. With this release EMX is now ready to be used with SMARTColor! To see the..

Expert Moldbase Extension 11.0.2.3 released

Expert Moldbase Extension 11.0.2.3 released

A new version of Expert Moldbase Extension 11.0.2.3 is now available. With this release EMX is now ready to be used with SMARTColor! To see the full..

SMARTElectrode 12.0.0.0 released

SMARTElectrode 12.0.0.0 released

SMARTElectrode 12.0.0.0 for PTC Creo Parametric 4.0, 5.0 and 6.0 is now available.The most important changes at a glance: New interfaces to EDM programming New Cutout UI..

AFX 6.0.2.0 released

AFX 6.0.2.0 released

The new version 6.0.2.0 of AFX is now available in the download portal. All technical changes can be found here

Expert Moldbase Extension 10.0 M032 released

Expert Moldbase Extension 10.0 M032 released

A new version of Expert Moldbase Extension 10.0 M032 is now available. All new features are described in the blog posts below: To see the full..

Expert Moldbase Extension 12.0.0.1 released

Expert Moldbase Extension 12.0.0.1 released

A new version of Expert Moldbase Extension 12.0.0.1 is now available. All new features are described in the blog posts below: Interfering Ejector Pin Heads can..

Expert Moldbase Extension 11.0.2.2 released

Expert Moldbase Extension 11.0.2.2 released

A new version of Expert Moldbase Extension 11.0.2.2 is now available. All new features are described in the blog posts below: Interfering Ejector Pin Heads can..

Survey to improve our product SMARTOptics

Survey to improve our product SMARTOptics

You are interested in optomechanical analysis software for Creo Parametric or you are already a customer? Currently we develop the new version of SMARTOptics – 7.0...

SMARTElectrode 11.0.2.0 released

SMARTElectrode 11.0.2.0 released

A new version SMARTElectrode 11.0.2.0 is now available. The most important changes are: Updated UDF’s for operation highlight           Available UDF’s: operation_surface:..

AFX 5.0.5.0 released

AFX 5.0.5.0 released

The new version 5.0.5.0 of AFX is now available in the download portal. All technical changes can be found here

New Creo 6.0 compatible AFX 6.0 released

New Creo 6.0 compatible AFX 6.0 released

The new version 6.0 of the Advanced Framework Extension is now ready to download. All important changes can be found in the What’s New presentation: here(PDF, 1.3..

Expert Moldbase Extension 12.0.0.0 compatible with Creo 6.0.0.0 released

Expert Moldbase Extension 12.0.0.0 compatible with Creo 6.0.0.0 released

A new version of Expert Moldbase Extension 12.0.0.0 is now available. this release is compatible with the latest Creo Parametric 6.0.0.0 and contains new features: The..

SMARTElectrode 10.0 M080 released

SMARTElectrode 10.0 M080 released

A new release SMARTElectrode 10.0 M080 is now available. See here for a list of all changes.

AFX 4.0 M090 released

AFX 4.0 M090 released

The new AFX 4.0 version is now available. Here are the most important changes: Resolved issue that could lead to endless regeneration Resolved issue with copy..

SMARTXHatch 9.0.0.0 released

SMARTXHatch 9.0.0.0 released

The new SMARTXHatch 9.0 is now available. New features of the new version are: Creo 5.0 compatible New rule type spacing auto New rule type iterate..

SMARTXHatch 8.0 M120 released

SMARTXHatch 8.0 M120 released

The next update for the SMARTXhatch 8.0 is now available. This release fixes an issue with aligned x-sections.

Expert Moldbase Extension 11.0.2.1 released

Expert Moldbase Extension 11.0.2.1 released

A new version of Expert Moldbase Extension 11.0.2.1 is now available. This version contains the new direct Export to Excel interface in the Bill of Materials..

Expert Moldbase Extension 10.0 M031 released

Expert Moldbase Extension 10.0 M031 released

A new version of Expert Moldbase Extension 10.0 M031 is now available. This version contains the new direct Export to Excel interface in the Bill of..

SMARTElectrode 11.0.1.0 released

SMARTElectrode 11.0.1.0 released

A new release SMARTElectrode 11.0.1.0 is now available. The most important changes are: [RM-6969][RM-7137] Operations or electrodes selectable for output Complete operations or single electrodes can..

Expert Moldbase Extension 11.0.1.2 released

Expert Moldbase Extension 11.0.1.2 released

A new version of Expert Moldbase Extension 11.0.1.2 is now available. This version contains important bug fixes. To see the full what’s new document follow this..

Expert Moldbase Extension 10.0 M022 released

Expert Moldbase Extension 10.0 M022 released

A new version of Expert Moldbase Extension 10.0 M022 is now available. The release contains important bug fixes. To see the full what’s new document follow..

Expert Moldbase Extension 11.0.1.1 released

Expert Moldbase Extension 11.0.1.1 released

A new version of Expert Moldbase Extension 11.0.1.1 is now available. The main new features are: Improvements: “Use One Model Rail” can be modified from Rail..

Expert Moldbase Extension 10.0 M021 released

Expert Moldbase Extension 10.0 M021 released

A new version of Expert Moldbase Extension 10.0 M021 is now available. The main new features are: Improvements: “Use One Model Rail” can be modified from..

AFX 5.0.2.2 released

AFX 5.0.2.2 released

The next update for the Advanced Framework Extension 5.0.2.2 is now available. Highlights of the version: Enhancements Removed „File open error“ messages Replace subassembly should remember..

AFX 4.0 M071 released

AFX 4.0 M071 released

AFX 4.0 M071 now ready to download. Most important changes: ENH: Remove „File open error.“ Message FIX: Copy from template directory does not copy elements that are..

AFX and IFX included in Creo Design Packages

AFX and IFX included in Creo Design Packages

With the introduction of the new subscription software packages – starting with 2018-10-01 – the full versions of our products Intelligent Fastener Extension (IFX) and Advanced Framework Extension (AFX) are included in..

SmartAssembly 6.0 M070 released

SmartAssembly 6.0 M070 released

A new version of SmartAssembly 6.0 M070  now available. The main enhancements are: New enhancements in the graphical user interface. Support of new Creo 4.0 geometric..

Progressive Die Extension 11.0.1.0 released

Progressive Die Extension 11.0.1.0 released

A new version of Progressive Die Extension Extension 11.0.1.0 is now available. An update to this version is required to support Creo Parametric 5.0.2.0. The complete..

Progressive Die Extension 10 M020 released

Progressive Die Extension 10 M020 released

A new version of Progressive Die Extension Extension 10 M020 is now available. The complete release notes can be found here.

Progressive Die Extension 11.0.0.0 released

Progressive Die Extension 11.0.0.0 released

A new version of Progressive Die Extension Extension 11.0.0.0 is now available. This release is compatible to Creo Parametric 5.0.0.0. The complete release notes can be..

Expert Moldbase Extension 10 M020 released

Expert Moldbase Extension 10 M020 released

A new version of Expert Moldbase Extension 10 M020 is now available. The main new features are: Bugfixes: Visualization issue of Moldbase Definition solved. The complete..

Expert Moldbase Extension 11.0.1.0 released

Expert Moldbase Extension 11.0.1.0 released

A new version of Expert Moldbase Extension 11.0.1.0 is now available. The main new features are: Bugfixes: Visualization issue of Moldbase Definition with Creo Release 5.0.2.0..

AFX 4.0 M070 released

AFX 4.0 M070 released

AFX 4.0 M070 now ready to download. Most important changes: FIX: Copy sheetmetal connector did not copy drawing FIX: Bugs fixed in enhanced copy function ENH:..

AFX 5.0.2.1 released

AFX 5.0.2.1 released

The next update for the Advanced Framework Extension 5.0.2.1 is now available. Highlights of the version: Preview color in joints should only be applied once New..

Expert Moldbase Extension 9.0 M027 released

Expert Moldbase Extension 9.0 M027 released

A new version of Expert Moldbase Extension 9.0 M027 is now available: This release contains a fix for the changed behavior of the GUI in Creo..

Expert Moldbase Extension 11.0.0.2 released

Expert Moldbase Extension 11.0.0.2 released

A new version of Expert Moldbase Extension 11.0.0.2 is now available. The main new features are: Improvements: Minitoolbar for Components Improved UDFs and Options for Ejector..

Expert Moldbase Extension 11.0.0.1 released

Expert Moldbase Extension 11.0.0.1 released

A new version of Expert Moldbase Extension 11.0.0.1 is now available. The main new features are: Improvements: Minitoolbar for Components Improved UDFs and Options for Ejector..

Expert Moldbase Extension 10.0 M014 released

Expert Moldbase Extension 10.0 M014 released

A new version of Expert Moldbase Extension 10.0 M014 is now available. The main new features are: Improvements: Minitoolbar for Components Improved UDFs and Options for..

AFX 4.0 M060 released

AFX 4.0 M060 released

AFX 4.0 M060 now ready to download. Most important changes: FIX: Translation mechanism should now also be able to handle spaces in the message id’s FIX:..

AFX 5.0.1.2 released

AFX 5.0.1.2 released

The second update for the Advanced Framework Extension 5.0.1.2 is now available. Highlights of the version: Optimized performance of modify profile type and size Modify component..

SMARTElectrode 10.0 M050 released

SMARTElectrode 10.0 M050 released

A new release SMARTElectrode 10.0 M050 is now available. Current changes: [RM-6551] Active Configuration Customer configuration will be saved to “%USERPROFILE%\Documents\buw\SMARTElectrode\configuration” for new installations. At startup, the..

SMARTElectrode 10.0 M040 released

SMARTElectrode 10.0 M040 released

A new release SMARTElectrode 10.0 M040 is now available. Current changes: [RM-5578] Notifications in burnsheet UI Notifications show additional information and warnings for electrodes. Click on..

AFX 5.0.1.1 released

AFX 5.0.1.1 released

The first update for the Advanced Framework Extension 5.0.1.1 is now available. Highlights of the version: New functions in profile and subassembly dialog to create references..

Expert Moldbase Extension 11.0.0.0 released

Expert Moldbase Extension 11.0.0.0 released

A new version of Expert Moldbase Extension 11.0.0.0 is now available. This release is compatible with Creo Parametric 5.0.0.0. The complete change log can be found here.

AFX 5.0.0.1 released

AFX 5.0.0.1 released

The first Creo 5.0 compatible version of the Advanced Framework Extension 5.0.0.1 has been released. Highlights of the new version: New user-interface of the Element Definition..

Expert Moldbase Extension 10.0 M013 released

Expert Moldbase Extension 10.0 M013 released

A new version of Expert Moldbase Extension 10.0 M013 is now available. The main new features are: New Components: Side interlocks -Strack Z38, Z46 and  W44..

SMARTXHatch M110 released

SMARTXHatch M110 released

A new version of SMARTXHatch is now available. It brings extensive performance increase and fixes issues with unknown line styles.

Expert Moldbase Extension 10.0 M012 released

Expert Moldbase Extension 10.0 M012 released

A new version of Expert Moldbase Extension 10.0 M012 is now available. The main new features are: New export functionality of cooling circuit curves for moldflow..

SMARTElectrode 10.0 M030 released

SMARTElectrode 10.0 M030 released

A new release SMARTElectrode 10.0 M030 is now available. Current changes: Setup Wizard New Setup Wizard on 1st start of application to help users to configure..

AFX 4.0 M041 released

AFX 4.0 M041 released

AFX 4.0 M041 now ready to download. Most important changes: FIX: Profile on two points no longer crashes when a user selects same start and end..

Problems on App-Start in Creo 3.0 M130 / Creo 4.0 M020

Problems on App-Start in Creo 3.0 M130 / Creo 4.0 M020

Creo versions: Creo 3.0 M130 / Creo 4.0 M020 and above B&W products: all Description Due to a bug in legacy versions of the Microsoft system library ucrtbase.dll Creo prohibits..

Expert Moldbase Extension 10.0 M011 released

Expert Moldbase Extension 10.0 M011 released

A new version of Expert Moldbase Extension 10.0 M011 is now available.We implemented many new components, including ejectors, guides and cooling components of the suppliers Strack,..

SMARTXHatch 8.0 M100 released

SMARTXHatch 8.0 M100 released

A new version of SMARTXHatch 8.0 M100 is available for download.

Advanced Framework Extension 4.0 M030 released

Advanced Framework Extension 4.0 M030 released

A new version of Advanced Framework Extension 4.0 M030 is available for download.

Expert Moldbase Extension 10.0 F001 released

Expert Moldbase Extension 10.0 F001 released

The new Expert Moldbase Extension 10.0 F001 is now available. This release contains a some new features presented in this document: What’s new(PDF, 587.0 kB)

Expert Moldbase Extension 10.0 F000 released

Expert Moldbase Extension 10.0 F000 released

The new Expert Moldbase Extension 10.0 F000 is now available. This release contains a some new features presented in this document: What’s New?(PDF, 1.4 MB) Some..

Load more