B&W News
Here we would like to provide you with the latest information about our products. This means not only the explanation of the latest functions in our software, but also tips and tricks that can make your everyday design work easier.
Please feel free to use the filter function or the search on our site for a more targeted selection.
Top news
All news
New function available in SMARTXHatch
SMARTXHatch 13.0 There are some enhancements in the new SMARTXHatch Version: Creo 9.0 support Added pattern hatching support Pattern hatching For a manual or rulebased modification of your hatching, you..
New SMARTElectrode Versions released
New versions of SMARTElectrode for Creo Parametric are now available! SMARTElectrode 15.1.0.0 / 14.1.0.0 / 13.1.0.0 / 12.1.0.0 An overview of the main improvements and bug fixes available in all..
Using the option SOLID_CONTOUR_CLEARANCE
Purpose The option SOLID_CONTOUR_CLEARANCE allows you to define the minimum distance by which the automatically selected base must be larger in X/Y direction than the contour of the electrode. SMARTElectrode..
Using the option LATERAL_KEEPOUT_DISTANCE
Purpose The option LATERAL_KEEPOUT_DISTANCE defines the lateral keepout area in the X/Y direction around the base, which must remain free of workpiece geometry. This, along with the normal distance D1..
Calculation of Start and Secure Position
Purpose The enhancement improves the default calculation of start and safety position. As a result, the user can partially save time for setting custom start and safety position. Previous Behavior..
New SMARTColor Versions available
There are three new SMARTColor versions available now! SMARTColor Versions 7.0.4.0 / 8.0.2.0 / 9.0.0.0 Improvements Documentation is now available in german. Easier placement. Calculated column width depending on the..
New IFX Version 9.0.1.1 released
IFX 9.0.1.1 The new IFX version, compatible with Creo 9.0, contains some enhancements and fixes: Enhancements Set thread depth to ‘Through Thread’ if a hole with through thread is selected...
New Version of IFX available
IFX 7.0.9.0 There are some bugfixes in the new IFX Version: Fixed problem with hole tables while creating and redefining a dowel pin . [RM-13560][SPR-13773021] Remove blanks at the end..
New Versions of IFX released
This time we have released two new versions of our Intelligent Fastener Extensions (IFX). Below we give you a brief overview of the most important changes. IFX 8.0.5.0 There are..
Expert Moldbase Extension is now ready for Creo 9.0
Our mold base module Expert Moldbase Extension (EMX) is now ready for the new Creo 9.0 release with the following version: EMX 15.0.0.0 Additionally, we created new versions compatible with..
Creo 9.0 Technical Update: AFX – Updated AutoUDF User Interface
Creo 9.0 is the CAD system of the year 2022 not to be missed. An interesting change for our Advanced Framework Extension (AFX) – users, that comes with the new..
SMARTElectrode 15.0.0.0 for Creo Parametric 9.0 released
A new version of SMARTElectrode is available now. SMARTElectrode 15.0.0.0 SMARTElectrode 15.0.0.0 The version can be used from Creo Parametric 9.0.0.0. What’s new in 15.0.0.0? Open complete changelog here. ..
New Version of Expert Moldbase Extension released
For our mold base design module Expert Moldbase Extension (EMX) new updates are now available: EMX 14.0.1.10 EMX 13.0.3.10 In this release we worked on minor bugfixes. Find more detailed..
New Version of IFX available
IFX 7.0.8.0 There are some bugfixes in the new IFX Version: Problem with redefinition of countersunk screws fixed. The problem occured in combination with Auto-UDF. The Auto-UDF information was lost...
New Version of AFX released
We have released the new version 9.0.0.1 for Advanced Framework Extension (AFX). Version 9.0.0.1 has the following enhancements : Creo 9.0 support New AutoUDF user interfaces to improve workflow Add..
New Version of AFX released
We have released the new version 7.0.9.1 for Advanced Framework Extension (AFX). The following points should be noted for version 7.0.9.1: Updated toolkit libraries to Creo 7.0.4.0 for security reasons..
New Version of AFX released
We have released the new version 8.0.4.0 for Advanced Framework Extension (AFX). The following points should be noted for version 8.0.4.0. Updated toolkit libraries to Creo 8.0.1.0 for security reasons..
New versions of SMARTElectrode released
New updates for SMARTElectrode are available now. SMARTElectrode 14.0.3.0 The version can be used from Creo Parametric 8.0.1.0. What’s new in 14.0.3.0? Open complete changelog here. SMARTElectrode 13.0.5.0 The..
New Releases for Expert Moldbase Extension are available
For our mold base design module Expert Moldbase Extension (EMX) new updates are now available: EMX 14.0.1.7 EMX 13.0.3.7 In these releases new components are implemented: You will find new..
New Version of IFX available
IFX 8.0.4.0 Improvements Problem with redefinition of countersunk screws fixed Fixed Creo crash when Redefine a screw fastener This is only a quick overview of the most important changes. Find..
Did you know about Nuts for Sheet Metal in IFX
Did you know that the PEM® Floating Fasteners Types AC / AS / LAC / LAS are included in PTC Creo Intelligent Fastener Extension (IFX)? Here is a short description..
New versions of SMARTElectrode released
New updates for SMARTElectrode are available now. SMARTElectrode 14.0.2.0 The version can be used from Creo Parametric 8.0.1.0. What’s new in 14.0.2.0? Open complete changelog here. SMARTElectrode 13.0.4.0 The..
New Releases for Expert Moldbase Extension are available
For our mold base design module Expert Moldbase Extension (EMX) new updates are now available: EMX 14.0.1.4 EMX 13.0.3.4 In this releases we integrated the Weblink button into the Library..
New Releases for Expert Moldbase Extension are available
For our mold base design module Expert Moldbase Extension (EMX) new updates are now available: EMX 14.0.1.1 EMX 13.0.3.1 In both release we improved the assembly process for spring components...
This was the B&W Webinar Week 2021!
In October our annual B&W webinar week took place. We hopefully provided interesting insights as well as tips and tricks for our software, with its 13 sessions in English and..
New versions of SMARTElectrode released
New updates for SMARTElectrode are available now. SMARTElectrode 14.0.1.0 The version can be used from Creo Parametric 8.0.1.0. What’s new in 14.0.1.0? Open complete changelog here. SMARTElectrode 13.0.3.0 The version..
B&W Webinar Week 2021
Our topics for the B&W Webinar Week 2021 are available, now. Did you already know how you can efficiently design electrodes in Creo Parametric and pass them on to EDM..
Displaying tolerances and fits in IFX hole notes
There is a possibility to replace values from the note with the corresponding dimension. This allows to display and output tolerances and fits. To display the tolerances proceed as follows...
New Releases of SMARTXHatch
New versions of SMARTXHatch are available. Both versions have the ICU fix and therefore run with the new Toolkit libraries. SMARTXHatch 11.0.1.0 For version 11.0.1.0 to work, it requires at..
Successfully provide company-wide configuration in Expert Moldbase Extension
In the Expert Moldbase Extension many opportunities exist to customize the software behavior based on the company’s requirements. Anyhow, it is necessary to understand how to manage and provide this customer configuration..
B&W at SpotOn by Simpatec “The colorful way to warpage model”
We will be attending the webinar SpotON by SimpaTec GmbH with a customer presentation. The english version will be on Thursday, August 19th. Andreas Siedler, Festo SE & Co. KG,..
How to correct Creo relations with SMARTUpdate without breaking the models
In the first part of our little trilogy, you were introduced to Anja Liebhammer, the head of department for CAD design of one of the most innovative automotive suppliers in Germany. She..
The new functionalities in SMARTUpdate 11.0.0.0
A new version SMARTUpdate 11.0.0.0 is now available. We implemented the following new features: Introduce Inseparable Assemblies check to embed and extract components Components can be found by name and embedded or..
New Versions of SMARTOptics available
New versions are available for SMARTOptics 7.0.3.1 for Creo Parametric 4.0 to 6.0 7.1.0.0 for Creo Parametric 7.0.0.0 7.1.1.0 for Creo Parametric 7.0.4.0 8.0.0.0 for Creo Parametric 8.0.0.0 New user..
New Versions of SMARTHolechart available
New versions are available for SMARTHolechart. 13.0.1.0 for Creo Parametric 7.0.4.0 14.0.0.0 for Creo Parametric 8.0.0.0 Support for embedded components.
New Versions of IFX available
IFX 7.0.4.0 Enhancements and Improvements Unicode characters can now be used in the param_relation.txt file. Thread surfaces are no longer allowed as a position reference. Fix some bugs. This is..
The relations in our Creo parts are a big mess
Do you struggle with the relations in your Creo parts? Have a look at this story to find out how you can solve it. After-Work family dinner “Dinner is ready!”..
Potential issue in running B&W software in Creo 7.0.4.0 and 8.0.1.0
Applies To Creo Parametric versions from 7.0.4.0 and 8.0.1.0 onwards. AFX, IFX, SMART products and many other customer-specific applications. Description A new checkbox Legacy Toolkit Application Runtime is available in the Creo..
How to customize sort order in SMARTElectrode burnsheet and export
In this blog post, you will learn more about the sort order of electrodes in burnsheet and how to customize the order in export. Note: These enhancements are available since SMARTElectrode 12.0.5.0 and..
How to customize placement rules for blanks in SMARTElectrode
This blog post explains how you can customize the blank placement rules to suit to your needs. SMARTElectrode offers the possibility of preparing different types of blanks – e.g. round..
New Releases for Expert Moldbase Extension are available
For our mold base design module Expert Moldbase Extension (EMX) new updates are now available: EMX 13.0.2.1 EMX 12.0.2.9 EMX 10 M057 In all modules we improved the functionality to transfer surface..
New Release of SMARTXHatch 10.0.2.0
A new version SMARTXHatch 10.0.2.0 is available now. We implemented the following new features: Application should no longer become unresponsive when a custom line style is used. File encoding should now be..
New Release of AFX 7.0.3.0
A new version Advanced Framework Extension (AFX) 7.0.3.0 is available now. We implemented the following new features: Children of subassemblies are given correct names when replacing the model in top level assembly..
Sought-after MBD expertise
Some weeks ago PTC broadcasted worldwide a MBD event called “Planning Your Model Based Journey“. Jan Stothfang was asked to join the discussion panel and to share his experience about Model-Based-Definition along..
What’s new in SMARTColor Version 4.3.3.0 – New Settings And Icons
The new SMARTColor version 4.3.3.0 has been extended with several new features, which have been split to the respective blog posts. In this post we will talk about all the..
What’s New in SMARTColor 4.3.3.0 – The Multi Language Support
The new SMARTColor version 4.3.3.0 has been extended with several new features, which have been split to the respective blog posts. In this post we will talk about the multi..
What’s New in SMARTColor 4.3.3.0 – Enhancements to the ‘Model Overview’ dialog
The new SMARTColor version 4.3.3.0 has been extended with several new features, which have been split to the respective blog posts. This post is all about the enhancements of the..
Planning Your Model-Based Journey
We are happy that Jan Stothfang will be part of this comprehensive discussion of Model-Based Definition / Enterprise (MBD/MBE). You’ll hear from those with hard-won practical experience about how they..
New Functionality for Hole Charts in IFX
In this blog post, you will find out which enhancements are available for creating holes for screw fasteners and how to use them. In the next blog post on this..
New Version of Creo Intelligent Fastener Extension 7.0.3.0 released
Select hole chart for IFX holes Advantages Use different hole charts for different fastener types. Show different hole notes. Control the counterbore diameter with CBOREDIAM and CSINKDIAM. Details / Usage..
Tip: How is it possible to edit plate dimensions which differ from the standard supplier sizes?
We received some customer requests regarding this specific change in the software. Hence, we want to get a bit more into detail to that in this blog post to provide..
New versions of Expert Moldbase Extension released
EMX releases new updates in different versions among others new and updated DME EUROPE and MEUSBURGER components are available EMX 13.0.1.0 EMX 12.0.2.8 EMX 10 M056 Find more information about..
Collaboration with DME Europe
Some customers asked us about the possibility of DME components in EMX – the tooling application for Creo Parametric. For this development, we have selected DME Europe as a component partner...
PTC/USER Webinar – Creo Color Coding
Jan Stothfang will give a presentation on “Creo Color Coding – A Technique to transfer 3D Model Information for Downstream Processes” as part of the PTC/User Expert Series Webinars on..
New functions with SMARTUpdate 10.0.0.0
A new version SMARTUpdate 10.0.0.0 is available now. We implemented the following new features: There is a new “Body Check” to adjust body properties. Customize materials of each body: Find and rename..
Note about issues with digitally signed B&W applications
During the past months, we received a small number of reports describing issues with loading IFX or AFX during Creo startup. Analyzing the problem, we found that the code signature..
AFX 7.0.2.0 released
The next update for the Advanced Framework Extension 7.0.2.0 is now available. See here here for a list of all changes.
Intelligent Fastener Extension 7.0.2.0 released
A new version of Intelligent Fastener Extension 7.0.2.0 is available now. The complete list of changes can be found in the changelog. Details about the new features can be found in..
New SMARTColor Version 6.3.1.0 available!
A new version SMARTColor 6.3.1.0 is available now! You can define a single template symbol usable for all color definitions now. You can download the complete What’s New document here(PDF) and you will find..
That was our B&W Webinar Week 2020!
B&W Webinar Week 2020 was a fantastic event with 14 sessions from October 27th to 29th in two different languages. There were again many exciting topics, great questions from customers and..
SMARTMenu 11.0.0.0 released
The new SMARTMenu 11.0.0.0 is now available for downloading. It is compatible with Creo 6.0. An overview of technical changes can be found here.
SMARTMenu 10.0.1.0 released
The new SMARTMenu 10.0.1.0 is now available for downloading. An overview of technical changes can be found here.
SMARTMenu 12.0.0.0 released
The new SMARTMenu 12.0.0.0 is now available for downloading. This version is compatible with Creo 7.0. An overview of technical changes can be found here.
Intelligent Fastener Extension 4.0 M140 released
Intelligent Fastener Extension 4.0 M140 is now available. The complete list of changes can be found here. An overview of compatibility can be found here.
SMARTElectrode 13.0.0.0 released
SMARTElectrode 13.0.0.0 for Creo Parametric 7.0 is now available for download. This release supports the new features for multi-body design introduced in Creo Parametric 7.0. Detailed information about changes and enhancements..
SMARTElectrode 12.0.4.0 released
SMARTElectrode 12.0.4.0 for Creo Parameric is now available! This release supports Creo Parametric 4.0, 5.0 and 6.0 and automates the design of sinking electrodes. Detailed information about changes and enhancements are..
AFX 7.0.1.0 released
The next update for the Advanced Framework Extension 7.0.1.0 is now available. See here here for a list of all changes.
AFX 6.0.5.0 released
The next update for the Advanced Framework Extension 6.0.5.0 is now available. See here here for a list of all changes.
Expert Moldbase Extension 13.0.0.3 released
A new version of Expert Moldbase Extension 13.0.0.3 is now available. To see the full what’s new document follow this link here(PDF, 1.2 MB). The complete change log can be found here
Expert Moldbase Extension 12.0.2.6 released
A new version of Expert Moldbase Extension 12.0.2.6 is now available. To see the full what’s new document follow this link here(PDF, 1.6 MB). The complete change log can be found here
Expert Moldbase Extension 10.0 M054 released
A new version of Expert Moldbase Extension 10.0 M054 is now available. To see the full what’s new document follow this link here(PDF). The complete change log can be found here
B&W webinar week 2020
Our topics for the B&W Webinar Week 2020 are available, now. Did you know that parameters and colors can make your work easier if you want to pass product and..
SMART3DExport 7.0 released
A new version of the “SMART3DExport” tool is now available. The complete list of changes can be seen here.
Intelligent Fastener Extension 6.0.5.0 released
A new version of Intelligent Fastener Extension 6.0.5.0 is available now. The complete changelog can be found here. An overview of compatibility can be viewed here.
Expert Moldbase Extension 13.0.0.2 released
A new version of Expert Moldbase Extension 13.0.0.2 is now available. To see the full what’s new document follow this link here(PDF, 1.2 MB). The complete change log can be found here
Expert Moldbase Extension 12.0.2.5 released
A new version of Expert Moldbase Extension 12.0.2.5 is now available. To see the full what’s new document follow this link here(PDF, 1.5 MB). The complete change log can be found here
Expert Moldbase Extension 10.0 M053 released
A new version of Expert Moldbase Extension 10.0 M053 is now available. To see the full what’s new document follow this link here(PDF). The complete change log can be found here
SMARTElectrode 12.0.3.1 released
A new release of SMARTElectrode 12.0.3.1 to support the design of sinking electrodes in Creo Parametric is now available. This update includes minor bugfixes and improvements for data export. The complete list of..
Intelligent Fastener Extension 7.0.1.0 released
A new version of Intelligent Fastener Extension 7.0.1.0 is available now. The complete changelog can be found here. An overview of compatibility can be viewed here.
Discover our new product websites!
We are proud to present our new product websites combining all relevant information at a glance. Find out about software benefits, features and technical details such as supporting videos, news..
SMARTElectrode 12.0.3.0 released
A new release of SMARTElectrode 12.0.3.0 to support the design of sinking electrodes in Creo Parametric is now available. The most important changes at a glance: SMARTElectrode is now available in French!..
SMARTHolechart 13.0.0.0 released
A new update of SMARTHolechart version 13.0.0.0 is available in the download area. All technical changes can be found in the changelog.
SMARTHolechart 12.0.4.0 released
A new update of SMARTHolechart version 12.0.4.0 is available in the download area. All technical changes can be found in the changelog.
SMARTXHatch 11.0.0.0 released
The new SMARTXHatch 11.0.0.0 is now available for downloading. This version is compatible with Creo 7.0. An overview of technical changes can be found here.
AFX 6.0.4.0 released
The next update for the Advanced Framework Extension 6.0.4.0 is now available. See here here for a list of all changes.
Intelligent Fastener Extension 6.0.4.2 released
A new version of Intelligent Fastener Extension 6.0.4.2 is available now. The complete changelog can be found here. An overview of compatibility can be viewed here.
New Version of SMARTColor available!
There are new version of SMARTColor available, now. You can download it here fitting to your Creo® version. We will give you a short overview about the new functions: Automated PMI assignment..
SMARTXHatch 10.0.1.0 released
The new SMARTXHatch 10.0.1.0 is now available for downloading. An overview of technical changes can be found here.
AFX 7.0.0.0 released
The newest update of AFX version 7.0.0.0 is now accessible in the download portal. This version supports Creo Parameteric 7.0.0.0. Updates: Overhauled ribbon interface Support of multi-body parts All technical..
Intelligent Fastener Extension 7.0
A new version of Intelligent Fastener Extension 7.0.0.0 is available now. It supports Creo 7.0. To see the full what’s new document follow this link here(PDF)(PDF, 320.2 kB). The complete changelog..
Expert Moldbase Extension 12.0.2.3 released
A new version of Expert Moldbase Extension 12.0.2.3 is now available. To see the full what’s new document follow this link here(PDF, 1.4 MB). The complete change log can be found here
Expert Moldbase Extension 11.0.4.2 released
A new version of Expert Moldbase Extension 11.0.4.2 is now available. To see the full what’s new document follow this link here(PDF, 1.5 MB). The complete change log can be found here
Expert Moldbase Extension 10.0 M052 released
A new version of Expert Moldbase Extension 10.0 M052 is now available. To see the full what’s new document follow this link here(PDF). The complete change log can be found here
Expert Moldbase Extension 13.0.0.0 released
A new version of Expert Moldbase Extension 13.0.0.0 is now available. This Version is compatible with Creo Parametric 7.0.0.0 and supports cut out creation in multi body parts. To see..
Expert Moldbase Extension 13.0.0.0 released
A new version of Expert Moldbase Extension 13.0.0.0 is now available. This Version is compatible with Creo Parametric 7.0.0.0 and supports cut out creation in multi body parts. To see..
B&W Software in times of Corona-virus
Dear customers, dear partners, dear interested parties, the B&W Software team will be there for you even in times of the corona virus. The health of our employees,..
SMARTElectrode 12.0.2.0 released
A new release of SMARTElectrode 12.0.2.0 to support the design of sinking electrodes in Creo Parametric is now available. The most important changes at a glance: New user interface to define start..
New Selection Tools for Electrodes
With the release of the SMARTElectrode 12.0.2.0 some improvements in geometry selection are also available. In detail these are: New selection tool “Tool tip” Integration of the shape-based selection filters from the..
Dynamic Editing of Cutout Features
In SMARTElectrode 12.0.2.0, size and position can be changed dynamically after selecting the geometry. Application of dynamic editing After selecting the surface for manufacturing, the definition of the..
Add workiece dimensions automatically
With the new version SMARTElectrode 12.0.2.0, workpiece dimensions can now be created automatically. Use of the my_drawing_format.cfg The use of the configuration file is briefly explained here using an example. On..
New User Interface “Start Position”
Starting with SMARTElectrode 12.0.2.0 it is possible to interactively define the start positions of the electrodes for the eroding process in a separate user interface. The definition of start positions is always..
Improved Workflow for Import of third-party Electrodes
With the new release SMARTElectrode 12.0.2.0, the import of old or third-party electrodes has been improved. There are a number of reasons why third-party electrodes have to be declared in electrode..
AFX 6.0.3.3 released
The next update for the Advanced Framework Extension 6.0.3.3 is now available. See here here for a list of all changes.
Expert Moldbase Extension 12.0.2.1 released
A new version of Expert Moldbase Extension 12.0.2.1 is now available. To see the full what’s new document follow this link here(PDF, 1.1 MB). The complete change log can be found here
PTC/ USER Open Forum 28th to 30th January 2020
B&W Software is again sponsoring and taking part at the winter event of the PTC user community in Scottsdale/ Phoenix. You’ll find us at the exhibition hall. Don’t miss our..
Expert Moldbase Extension 11.0.4.1 released
A new version of Expert Moldbase Extension 11.0.4.1 is now available. To see the full what’s new document follow this link here(PDF, 1.2 MB). The complete change log can be found here
Expert Moldbase Extension 10.0 M051 released
A new version of Expert Moldbase Extension 10.0 M051 is now available. To see the full what’s new document follow this link here(PDF). The complete change log can be found here
Merry Christmas!
The year 2019 is almost over – the B&W Software team says thank you! Enjoy the holidays with sweets and candlelight and look forward to a successful new year! With..
AFX 6.0.3.2 released
The next update for the Advanced Framework Extension 6.0.3.2 is now available. See here here for a list of all changes.
AFX 6.0.3.1 released
The next update for the Advanced Framework Extension 6.0.3.1 is now available. See here here for a list of all changes.
SMARTElectrode 12.0.1.3 released
A new version of SMARTElectrode 12.0.1.3 to support the design of sinking electrodes in Creo Parametric is now available. The most important changes at a glance: Automatic update of position data when..
Automatic update when operation zero is changed
From SMARTElectrode 12.0.1.3 it is possible to change the zero points of the electrode assembly interactively in Creo Parametric. Two methods are now available for editing: Redefinition using the user interface Execute..
Notifications in burnsheet
The display and editing of notifications in the burn list has been further improved in SMARTElectrode 12.0.1.3. Available messages are: Info – Electrode is a copy of Info – Electrode is..
Data output improvements for INGERSOLL
In SMARTElectrode 12.0.1.3 the data output for die-sinking EDM machines from INGERSOLL has been improved. A new feature is the output of the electrode type, which results from the e technology specifications in..
New manufacturing templates for use with Creo NC
Starting with SMARTElectrode 12.0.1.3, updated and new manufacturing templates for Creo NC are included. NC programming can be considerably simplified by using NC templates. Templates can be prepared for different machines..
PTC/User Benelux Event, Nov 29th 2019
At November 29th, the next PTC/User event will take place in Eindhoven. We will have a small booth and a presentation about “rule-based coloring of 3D models”. Today, many companies..
SMARTXHatch 10.0.0.0 released
The new SMARTXHatch 10.0 is now available for downloading. News Compatible with Creo 6.0 Concatenate rules with NOT/AND/OR Possibility to distribute hatchings to multiple views. All found components will inherit..
EMX is now SMARTColor ready
With the releases EMX 12.0.0.2, EMX 11.0.2.3 and EMX 10 M033 all plate templates and cut out UDFs are now prepared to apply color coding rules with the help of SMARTColor. This is achieved with the..
New Expert Moldbase Extension 12.0 Tutorial available
Extension 12.0 Tutorial available We just finished the new Tutorial. The PDF can be downloaded with here(PDF, 32.2 MB). The tutorial contains a step by step introduction to create a complete..
Expert Moldbase Extension 12.0.0.2 released
A new version of Expert Moldbase Extension 12.0.0.2 is now available. With this release EMX is now ready to be used with SMARTColor! To see the full what’s new document follow..
Expert Moldbase Extension 10.0 M033 released
A new version of Expert Moldbase Extension 10.0 M033 is now available. With this release EMX is now ready to be used with SMARTColor! To see the full what’s new document..
Expert Moldbase Extension 11.0.2.3 released
A new version of Expert Moldbase Extension 11.0.2.3 is now available. With this release EMX is now ready to be used with SMARTColor! To see the full what’s new document follow..
Designate Surface Functions for Cut-Out Geometry
One of the main benefits of using Expert Moldbase Extension during the moldbase designed is the automatic cut-out creation for standard components. These functionality is mainly based on Creo User-Defined-Features..
Webinar-Week October 2019
We would like to invite you to our webinar week from October, 08th to 10th 2019. During these three days we will present our latest software developments in short and..
Cut-Angle information in BOM Parameters
With the described method it is possible to visualize the cut angles of profiles in the BOM. This makes drawings of regular beams with just angle cuts and no extra..
EMX Standard Parts from Windchill
In this a bit longer blog post we will demonstrate which steps are required to: configure Expert Moldbase Extension for Windchill. to automatically create all instances of one standard component..
New interfaces to EDM programming
In addition to existing general output functionality, SMARTElectrode 12.0.0.0 introduces a new specific Post-Processor UI with newly developed interfaces to EDM. This new feature is available at extra cost and..
SMARTElectrode 12.0.0.0 released
SMARTElectrode 12.0.0.0 for PTC Creo Parametric 4.0, 5.0 and 6.0 is now available.The most important changes at a glance: New interfaces to EDM programming New Cutout UI Redefine Electrode Assembly Effective..
Improvements Data Output UI
UI for data output offers some new improvements in SMARTElectrode 12.0.0.0: Name of Operation Exports will be named like selected operation by default. All operations of electrode assembly can be exported..
Effective burn-area in Base UI
SMARTElectrode 12.0.0.0 offers input for effective burn-area on 2nd tab “Details” in Base UI for complete definition of technology parameters. Also workpiece material was added to UI to simplify the workflow...
Redefine Electrode Assembly
Electrode assembly definition can be loaded and changed in SMARTElectrode 12.0.0.0. This new functionality may be helpful, especially when working with reference parts. Also the start value for electrode counter can..
New Cutout UI
There is a new user interface for definition of cutouts available in SMARTElectrode 12.0.0.0. Users can now adjust position and dimensions before solid and cutout are created. UI can be opened again to..
AFX 6.0.2.0 released
The new version 6.0.2.0 of AFX is now available in the download portal. All technical changes can be found here
Expert Moldbase Extension 10.0 M032 released
A new version of Expert Moldbase Extension 10.0 M032 is now available. All new features are described in the blog posts below: To see the full what’s new document follow..
Expert Moldbase Extension 12.0.0.1 released
A new version of Expert Moldbase Extension 12.0.0.1 is now available. All new features are described in the blog posts below: Interfering Ejector Pin Heads can be trimmed Update Existing..
Configuration Options for Order Number Rules
Rules for order numbers in Expert Moldbase Extension can now be configured depending on supplier, type, unit and template part name This feature is available with the version EMX 10..
Improved Meusburger Lifter Assemblies
Three new Lifter assemblies are implemented: E3244 + E3240, E3246 + E3240, E32481 + E3248 + E3249 This feature is available with the version EMX 10 M032, EMX 11.0.2.2 and..
New Library Components for the Runner Channel Design
With the new impllementen Library Components and UDFs runnel channels can be designed easily. This feature is available with the version EMX 10 M032, EMX 11.0.2.2 and EMX 12.0.0.1 A..
Update Existing Ejector Pins in Case of late Design Changes
In case of a late design changes in the moldbase existing ejector pins can be updated with the new dialog in just one step. This feature is available with the..
Interfering Ejector Pin Heads can be trimmed
With this new command it is now possible to trim interfering ejector pin heades against each other. This feature is available with the version EMX 10 M032, EMX 11.0.2.2 and..
Expert Moldbase Extension 11.0.2.2 released
A new version of Expert Moldbase Extension 11.0.2.2 is now available. All new features are described in the blog posts below: Interfering Ejector Pin Heads can be trimmed Update Existing..
SmartAssembly Webinar by Carrier/UTC
A short while ago, there was a Webinar of the Pro/User group with the subject “Design Process Improvement and Automation”. The first nine minutes they are about the Pro/User group..
Survey to improve our product SMARTOptics
You are interested in optomechanical analysis software for Creo Parametric or you are already a customer? Currently we develop the new version of SMARTOptics – 7.0. Therefore, we ask you..
SMARTElectrode 11.0.2.0 released
A new version SMARTElectrode 11.0.2.0 is now available. The most important changes are: Updated UDF’s for operation highlight Available UDF’s: operation_surface: Csys with surfaces. Suitable..
Improved ejector options
Target group: All users. Advantages: increased flexiblity in use easier understanding through overhauled UI images Usage: Options for ejectors are displayed on a separate tab for components and assembly. Available..
Direct interface to export BOM to Excel
Target group: All users who process BOM data in Microsoft Excel. Advantages: Flexible export from Creo Parametric to Microsoft Excel Visual Basic macros in Excel are not required anymore Usage:..
Component tree in moldbase dialog
Target group: All users who want to check and update components in moldbase UI. Advantages: Easier access by component type Usage: Access to all assembled plates, components and patterns. ..
Usage of Mini-Toolbar
Target group: All users. Advantages: Easier assembly of components Faster access to redefine, delete and copy commands Usage: Available components after selection of point or axis: Screws Pins Guides Cooling..
AFX 5.0.5.0 released
The new version 5.0.5.0 of AFX is now available in the download portal. All technical changes can be found here
New Creo 6.0 compatible AFX 6.0 released
The new version 6.0 of the Advanced Framework Extension is now ready to download. All important changes can be found in the What’s New presentation: here(PDF, 1.3 MB) You can also..
Expert Moldbase Extension 12.0.0.0 compatible with Creo 6.0.0.0 released
A new version of Expert Moldbase Extension 12.0.0.0 is now available. this release is compatible with the latest Creo Parametric 6.0.0.0 and contains new features: The new mold base summary..
SMARTElectrode 10.0 M080 released
A new release SMARTElectrode 10.0 M080 is now available. See here for a list of all changes.
AFX 4.0 M090 released
The new AFX 4.0 version is now available. Here are the most important changes: Resolved issue that could lead to endless regeneration Resolved issue with copy subassemblies Conversion between MM..
SMARTXHatch 9.0.0.0 released
The new SMARTXHatch 9.0 is now available. New features of the new version are: Creo 5.0 compatible New rule type spacing auto New rule type iterate angles Specify fixed offsets..
SMARTXHatch 8.0 M120 released
The next update for the SMARTXhatch 8.0 is now available. This release fixes an issue with aligned x-sections.
Expert Moldbase Extension 11.0.2.1 released
A new version of Expert Moldbase Extension 11.0.2.1 is now available. This version contains the new direct Export to Excel interface in the Bill of Materials Dialog. Mit dem Laden..
Expert Moldbase Extension 10.0 M031 released
A new version of Expert Moldbase Extension 10.0 M031 is now available. This version contains the new direct Export to Excel interface in the Bill of Materials Dialog. Mit dem..
SMARTElectrode 11.0.1.0 released
A new release SMARTElectrode 11.0.1.0 is now available. The most important changes are: [RM-6969][RM-7137] Operations or electrodes selectable for output Complete operations or single electrodes can be selected for data..
Expert Moldbase Extension 11.0.1.2 released
A new version of Expert Moldbase Extension 11.0.1.2 is now available. This version contains important bug fixes. To see the full what’s new document follow this link here(PDF, 385.8 kB). The..
Expert Moldbase Extension 10.0 M022 released
A new version of Expert Moldbase Extension 10.0 M022 is now available. The release contains important bug fixes. To see the full what’s new document follow this link here(PDF). The complete..
Expert Moldbase Extension 11.0.1.1 released
A new version of Expert Moldbase Extension 11.0.1.1 is now available. The main new features are: Improvements: “Use One Model Rail” can be modified from Rail Plate Dialog Unicode characters..
Expert Moldbase Extension 10.0 M021 released
A new version of Expert Moldbase Extension 10.0 M021 is now available. The main new features are: Improvements: “Use One Model Rail” can be modified from Rail Plate Dialog Unicode..
AFX 5.0.2.2 released
The next update for the Advanced Framework Extension 5.0.2.2 is now available. Highlights of the version: Enhancements Removed „File open error“ messages Replace subassembly should remember last used reference subassembly..
AFX 4.0 M071 released
AFX 4.0 M071 now ready to download. Most important changes: ENH: Remove „File open error.“ Message FIX: Copy from template directory does not copy elements that are not renamed to working..
PTC / User Event Benelux am 30. November 2018
Direkt im Anschluss an das PTC Forum Europe findet in Eindhoven das PTC / User Event Benelux am 30. November 2018 statt. Dabei halten wir einen Vortrag zur Verwendung von..
AFX and IFX included in Creo Design Packages
With the introduction of the new subscription software packages – starting with 2018-10-01 – the full versions of our products Intelligent Fastener Extension (IFX) and Advanced Framework Extension (AFX) are included in in all “Creo Design”..
Updates due to technical changes in Creo 5.0.2.0
Due to technical changes in Creo Parametric 5.0.2.0 an update from EMX 11 to the version 11.0.1.0 and from PDX 11.0 to the version 11.0.1.0 is required. Without the update..
SmartAssembly 6.0 M070 released
A new version of SmartAssembly 6.0 M070 now available. The main enhancements are: New enhancements in the graphical user interface. Support of new Creo 4.0 geometric tolerance functionality. The complete..
Progressive Die Extension 11.0.1.0 released
A new version of Progressive Die Extension Extension 11.0.1.0 is now available. An update to this version is required to support Creo Parametric 5.0.2.0. The complete release notes can be..
Progressive Die Extension 10 M020 released
A new version of Progressive Die Extension Extension 10 M020 is now available. The complete release notes can be found here.
Progressive Die Extension 11.0.0.0 released
A new version of Progressive Die Extension Extension 11.0.0.0 is now available. This release is compatible to Creo Parametric 5.0.0.0. The complete release notes can be found here. Mit dem Laden..
Environment variables for configuration path
Through the environment variable you can decide where the configuration path of the software is located. Alternatives are separated by a semicolon. With this you can create different configurations for different..
Expert Moldbase Extension 10 M020 released
A new version of Expert Moldbase Extension 10 M020 is now available. The main new features are: Bugfixes: Visualization issue of Moldbase Definition solved. The complete change log can be..
Expert Moldbase Extension 11.0.1.0 released
A new version of Expert Moldbase Extension 11.0.1.0 is now available. The main new features are: Bugfixes: Visualization issue of Moldbase Definition with Creo Release 5.0.2.0 solved. The complete change..
AFX 4.0 M070 released
AFX 4.0 M070 now ready to download. Most important changes: FIX: Copy sheetmetal connector did not copy drawing FIX: Bugs fixed in enhanced copy function ENH: Added new standard DIN..
AFX 5.0.2.1 released
The next update for the Advanced Framework Extension 5.0.2.1 is now available. Highlights of the version: Preview color in joints should only be applied once New standard DIN EN 10305-5..
Quick Tip: How to use the command BUW_NO_COPY?
We got the following question by a customer: He would like to create an assembly in the library. The assembly has standard parts which shouldn’t be copied and parts which..
Expert Moldbase Extension 9.0 M027 released
A new version of Expert Moldbase Extension 9.0 M027 is now available: This release contains a fix for the changed behavior of the GUI in Creo 3.0M170. The complete change..
Expert Moldbase Extension 11.0.0.2 released
A new version of Expert Moldbase Extension 11.0.0.2 is now available. The main new features are: Improvements: Minitoolbar for Components Improved UDFs and Options for Ejector Pins New UDF Images..
Expert Moldbase Extension 11.0.0.1 released
A new version of Expert Moldbase Extension 11.0.0.1 is now available. The main new features are: Improvements: Minitoolbar for Components Improved UDFs and Options for Ejector Pins New UDF Images..
Expert Moldbase Extension 10.0 M014 released
A new version of Expert Moldbase Extension 10.0 M014 is now available. The main new features are: Improvements: Minitoolbar for Components Improved UDFs and Options for Ejector Pins New UDF..
AFX 4.0 M060 released
AFX 4.0 M060 now ready to download. Most important changes: FIX: Translation mechanism should now also be able to handle spaces in the message id’s FIX: License select dialog should..
AFX 5.0.1.2 released
The second update for the Advanced Framework Extension 5.0.1.2 is now available. Highlights of the version: Optimized performance of modify profile type and size Modify component should now only regenerate..
SMARTElectrode 10.0 M050 released
A new release SMARTElectrode 10.0 M050 is now available. Current changes: [RM-6551] Active Configuration Customer configuration will be saved to “%USERPROFILE%\Documents\buw\SMARTElectrode\configuration” for new installations. At startup, the active configuration is searched/loaded..
SMARTElectrode 10.0 M040 released
A new release SMARTElectrode 10.0 M040 is now available. Current changes: [RM-5578] Notifications in burnsheet UI Notifications show additional information and warnings for electrodes. Click on notification icon (green flag..
AFX 5.0.1.1 released
The first update for the Advanced Framework Extension 5.0.1.1 is now available. Highlights of the version: New functions in profile and subassembly dialog to create references “on the fly”. ..
Expert Moldbase Extension 11.0.0.0 released
A new version of Expert Moldbase Extension 11.0.0.0 is now available. This release is compatible with Creo Parametric 5.0.0.0. The complete change log can be found here.
AFX 5.0.0.1 released
The first Creo 5.0 compatible version of the Advanced Framework Extension 5.0.0.1 has been released. Highlights of the new version: New user-interface of the Element Definition dialog. It is now..
Expert Moldbase Extension 10.0 M013 released
A new version of Expert Moldbase Extension 10.0 M013 is now available. The main new features are: New Components: Side interlocks -Strack Z38, Z46 and W44 Top Interlocks – Agathon..
SMARTXHatch M110 released
A new version of SMARTXHatch is now available. It brings extensive performance increase and fixes issues with unknown line styles.
Expert Moldbase Extension Customer Survey
Dear Customers and Partners, were are motivated every day to improve our mold design software solution Expert Moldbase Extension. To achieve this goal we need your honest opinion! For this reason..
Tip: How to remove transparency on plates created in Expert Moldbase Extension
A customers question: Does anybody know how to eliminate the transparency on plates created in assembly definition? Within EMX options – Technology – Face color : I believe that this..
Tip: Custom Drop-Down Selection Menu in Expert Moldbase ExtensionBill of Materials and Edit Bill of Materials Entry Dialog
Hello, due to a customers question I will explain how you can set up a custom Drop-Down selection in the BOM or in the Edit BOM Entry dialog. In some..
Tip: Display ejector length in Expert Moldbase ExtensionBill of Materials
Hello EMX Users, A customers question: When we place a ejector, usually we trim it by molding surfaces. In BOM we have to show the trimmed length of the ejector...
Tip: How to change the cut distance of a “rot fix” for an ejector in Expert Moldbase Extension
Another answer to a customers question: When I place ejectors using EMX, the cut which is generated is always very close or coincident with the ejector shaft. See pic: This..
Tip: Color Defintions for Bores and Holes with Expert Moldbase Extension
Hello, a tiny blog entry for setting up color definitions for bores and holes in EMX. It is quite simple. Go to the EMX Options -> Technology Tab You will..
Expert Moldbase Extension 10.0 M012 released
A new version of Expert Moldbase Extension 10.0 M012 is now available. The main new features are: New export functionality of cooling circuit curves for moldflow analysis. New option INCLUDE_EJECTOR_BORES_IN_MOLD_ANALYSIS:..
SMARTElectrode 10.0 M030 released
A new release SMARTElectrode 10.0 M030 is now available. Current changes: Setup Wizard New Setup Wizard on 1st start of application to help users to configure SMARTElectrode. Final configuration directory..
AFX 4.0 M041 released
AFX 4.0 M041 now ready to download. Most important changes: FIX: Profile on two points no longer crashes when a user selects same start and end FIX: Bend profile no..
AFX regen post relations
To create relations in the regen post area to newly created afx models you can do the following steps: Activate hidden option Go to folder afx/configuration and rename the file..
Merry Christmas & a Happy New Year
Dear customers, partners and friends,After another exciting year we like to thank you for the good collaboration and the confidence shown to us.Instead of sending out personal presents we continue..
Problems on App-Start in Creo 3.0 M130 / Creo 4.0 M020
Creo versions: Creo 3.0 M130 / Creo 4.0 M020 and above B&W products: all Description Due to a bug in legacy versions of the Microsoft system library ucrtbase.dll Creo prohibits the start of B&W..
14th Nov – PTC Forum Europe
We would like to invite you to join us at PTC Forum Europe on November 14 as we explore the physical and digital worlds that are converging with dynamic force. Come be..
Expert Moldbase Extension 10.0 M011 released
A new version of Expert Moldbase Extension 10.0 M011 is now available.We implemented many new components, including ejectors, guides and cooling components of the suppliers Strack, Meusburger and Knarr. All..
Did you know about SUBINFO in IFX
Did you know that you can use the keyword SUBINFO in the *.dat files to allow multiple same sizes in one *.dat file? Usually IFX takes the first instance of the selected..
PTC/User Event Benelux
We will be attending this event and share a booth with TFH Technical Services. We are looking forward to seeing you there. Don’t miss our presentation ‘From legacy to annotated 3D..
SMARTXHatch 8.0 M100 released
A new version of SMARTXHatch 8.0 M100 is available for download.
Advanced Framework Extension 4.0 M030 released
A new version of Advanced Framework Extension 4.0 M030 is available for download.
Expert Moldbase Extension 10.0 F001 released
The new Expert Moldbase Extension 10.0 F001 is now available. This release contains a some new features presented in this document: What’s new(PDF, 587.0 kB)
Expert Moldbase Extension 10.0 F000 released
The new Expert Moldbase Extension 10.0 F000 is now available. This release contains a some new features presented in this document: What’s New?(PDF, 1.4 MB) Some improvements are also presented..
PTC Forum Europe 2016
Sehr geehrte Kunden, gerne möchten wir Sie zum PTC Forum Europe am 15. November 2016 einladen. Teilnehmen können Sie persönlich vor Ort in Stuttgart oder ganz einfach online von Ihrem..